Download Ninjatrader For Mac K Dcan Utility 2.0 Download Free Mockup Software For Mac Virtual Studio Live software, free download Download Skype For Mac Lion. Edit 5: Updated DATEN link to 60.0. K+dcan Utility 2.0 Download (big thanks to dallas.dainers) K Dcan Cable Driver. The little brother to our Expert K+DCAN! Apps download. Directly tested, approved & recommended by some of the top BMW tuning & development companies out there such as: MHD, xHP, Motiv, Twisted Tuning, Wedge Performance, and BimmerLabs -Code, Flash & Diagnose ALL E-Chassis-Flash F-Chassis Vehicles via MHD Flasher and xHP-Diagnose F-Chassis-Cuts Flash Times in HALF!-Proven to flash modules other K+DCAN's.
Step 1:
Connect INPA K + DCAN cable to laptop or PC,then install driver program.Next open 'Device manager',open 'USB Serial Port(COM3)' attributes,choose 'Port Setting' and 'advanced…'
Set COM Port to 9,Set the delay timer to 1, click 'OK'
Setp 2:
Open C: /EDIABAS/BIN/EDIABAS.INI. with notepad,check'Interace = STD:OBD'.
Set 'TCP Port=6801'
Open C: /EDIABAS/BIN/OBD.INI,check'OBD Port=COM9'
Step 3:
Connect car and laptop with INPA K + DCAN cable,run BMW ISTA software,click setting Mac torrent search.
Choose'VCI Coding'and 'Ediabas standard settings(ediabas.ini)'，then click ok
Back to main menu,then click operate,choose read car data,click complete
Now waiting for the vehicle recognition process
This is to connect the INPA cable with BMW ISTA. There is no problem with the test in this guide, but it will not be responsible for any potential loss or damage.
Related posts:
If your cheap BMW INPA K+DCAN USB interface with FTDI chip failed to install drivers or the system prompt cannot locate the drivers. Here is a little write-up on how to fix it.
Disclaimer:
I am using Windows 8.1 system. No sure if it works on yours. You are on your own risk.
Pre-installation caution:
Here are the INPA driver & software, free download links. If the driver/software is working, then ignore the next part. Otherwise take a look at the following part for reference.
INPA Driver: http://www.obd2vip.com/download/inpa-driver.zip（Close antivirus software or set your browser to download success）
INPA software: http://www.obd2vip.com/download/inpa-2.zip
Procedure:
1. Open your Device Manager. Control Panel–Hardware & Sound–Device Manager.
2. Connect the INPA K+DCAN cable with computer/PC-Double click
3. Locate USB Serial Converter->DetailsDropdown Menu->Hardware IDs. The PID number is the one you want. Will most likely be 0000.
4. Download CDM v2.08.30
http://www.ftdichip.com/Drivers/CDM/CDM%20v2.08.30%20for%20Windows%208.1.zip
K Dcan Cable
5. Disable 'Driver signature verification' Settings–Change PC Settings–Recovery–Advanced Startup–Restart.
This will restart your PC to Advanced settings. From there: Troubleshoot–Advanced Options–Startup Settings–Restart–F7
K Dcan Usb
Follow these picture guides:
Your PC will then restart with signature verification disabled. You are now able to edit the INPA drivers.
Torrent client download. 6. Unzip the Drivers file that you just downloaded and open up
7. Open ftdibus.inf
8. Replace every PID_6001 with PID_0000 to match your hardware ID. Scan through the whole document. Then save it.
9. Then find ftdiport.inf. Do the same to ftdiport.inf
10. Back in your Device Manager double click on your OBDII cable again.
Locate USB Serial Convertor Properties->Driver->Update Driver-> Browse my computer.
Locate your driver and install. You will need to install it for both USB Serial Converter and Ports & COM.
11. Setup INPA cable as normal and run INPA software.
It seems that the white FTDI chip INPA cables have to be manually put into D-CAN mode. This file will take care of that. It is normal for the LED to go out.
http://www.mediafire.com/download/35fnrnd3q3dvf3w/D-CAN.exe
If you put the cable into DCAN mode, the LED goes off, and it says there is no adapter connected. Please connect it to the car and run the DCAN mode.
K Dcan Cable Software
Related posts:
